新研发成功之高效智能冷却定型机，长度短，冷却效果特佳。

The newly developed high efficiency intelligent cooling shaping machine has short length and excellent cooling effect.

拔楦后鞋子内部及楦头底部之温度达到 30℃~35℃以内，故定型效果特佳，长时间不变形。

After pulling the last, the temperature inside the shoe and the bottom of the last reaches 30 ℃ ~ 35 ℃. Therefore, the shaping effect is very good and does not deform for a long time.

相同长度时，一般传统冷却定型机，冷却时间约只达 3-6 分钟，使用高效智能冷却定型机，可使鞋子达到内外皆冷之境界，鞋子定型特佳。

With the same length, the cooling time of traditional cooling shaping machine is only about 3-6 minutes. The use of efficient intelligent cooling shaping machine can make the shoes reach the state of cold inside and outside, and the shaping of shoes is excellent.

本机总长度为 4M，节省长度，于短时间内就能达到好的冷却定型效果。

The total length of the machine is 4m, which can save length and achieve good cooling effect in a short time.

本机使用特殊回流式冷风循环，冷气不外漏，故能达到节能效果。

This machine uses the special return type cold air circulation, the cold air does not leak out, so it can achieve the energy saving effect.